Album:Vegetable Oil Conversion:The Tanks

Before flaring the ends of the tube,
Cutting the tank port.
It's good to have a port into the dirty tank for cleaning and maintenance. The cut isn't easy to make (especially since I was using a bulky skilsaw), so getting this right was tricky. I made this simple jig to run a pen around, and then I actually used it to hold the skilsaw (notice the cut at the top of the wood). It somewhat worked.
Enough to hold the tank port

All Material © 2006, David Ljung Madison
Album created by album generator from David's Marginal Hacks on Wed Oct 25 03:33:32 2006